LAWN & GARDEN EQUIPMENT
AERATOR, STAND ON 30"
 Image for reference only  Click on above thumbnails for alternate view | |
Manufacturer: SCAG
Model: AS30-23CV-DS
4 hours: $175.00
8 hours: $225.00
Daily: $240.00
Weekend: $360.00
5 Day: $720.00
Weekly: $960.00
Monthly: $2,400.00
Additional Information
- UNIT WEIGHS ABOUT 1100 LBS
- Length: 68.6"
- Width: 49.8"
- Height: 51.2"
- Type: Plug-style aeration. Mid/under-belly mount.
- Aerating Width: 30″
- Aerating Depth/Adjustment: 1” to 4” in 1/2” increments. Simple and intuitive depth selection pin with easy-grip rubber knob.
- Tines: 48 self-cleaning, replaceable, steel coring tines
- Tine Activation & Pressure: Hydraulic tine engagement (raise and lower) via a foot-activated switch. Tine activation switch on the instrument panel prevents accidental engagement/disengagement while working or transporting. Adjustable hydraulic down-pressure helps to penetrate even the hardest and driest soils to ensure effective aeration performance in all conditions.
- Engine Specification
- Brand: Kohler Command Pro
- Model: CV732
- Horsepower: 23.5 HP @ 3600 RPM
- Torque: 40.3 ft-lbs. (peak)
- Type: 4 cycle gas, twin-cylinder, air-cooled, OHV, vertical shaft engine
- Displacement: 747 cc (45.6 cubic inch)
- Cylinders 2 cast-iron sleeves
- Governor: Mechanical type governor with variable speed control set at 3600 rpm (±100 rpm), idle set at 1800 rpm (±150 rpm)
- Air Intake Group: Large capacity 2-stage canister air filter
- Exhaust Group: Single exhaust canister muffler
- Fuel Pump Group: Integral fuel pump with inline fuel filter, internal fuel line vent; float feed; two barrel, adjustable idle, afterfire solenoid.
- Oil Pump Group: Full pressure lube, with full-flow filter, 2 quart oil capacity
- Starter/Electrical/Charging System: 12 volt “maintenance-free” sealed battery with alternator, solid state ignition with key start. 15 amp charging system, regulated.
- Engine Deck Thickness: 1/4″ steel
- Fuel Tank: 5.5 gallon (20.8 liters) tank with molded-in cup holder
- Drive Wheels/Tires: 18 x 6.5 – 8 four-ply pneumatic tubeless, radius edge
- Caster Wheels: 13 x 6.5 – 6 Flat-Free (semi-pneumatic)
- Brakes: Lever actuated linkage to brakes on both drive wheels
- Operator Platform: Heavy gauge steel with extruded star pattern for no-slip footing. Dual adjustable suspension for operator comfort level preference.
- Operator Comfort Pad: Large heavily-bolstered operator cushion can be easily removed without tools for access to hydraulics
- Drive System Type: Hydro drive with two variable displacement pumps and two cast-iron high-torque wheel motors for independent control of each drive wheel
- Hydro Pumps: Two Hydro-Gear PG Series 10cc pumps with dump valves for movement without running engine; one cooling fan
- Drive Wheel Motors: Two Parker TG 14.5 cu. inch cast-iron high torque wheel motors
- Hydro Fluid Cooling Group: 3.0 qt. capacity cooling reservoir; uses SAE 20W50 fluid and 10 micron filter
- Steering/Travel Control: Twin lever steering control with individual control to each wheel
- Dump Valves: Allows for movement without engine running
- Axles: 1.25″ heavy-duty, straight motor shafts
- Wire Harness: 14 and 16 gauge wire
- Safety Group: Footplate-actuated operator presence system interlock to engine kill
- Forward Speed Range: 0 up to 7.0 mph
- Reverse Speed Range: 0 up to 3.0 mph
Consider these items to go with your rental:
* Prices are subject to change. Delivery and other applicable fees are not included in this price estimate.
Please call us for any questions on our aerator stand on 30 inch rentals in Chesterland, Chardon, & Middlefield OH.